So there isn't a set torque value for mounting the Trailer Valet JXC Trailer Jack # TV94FR so your best option is to get it nice and tight with hand tools and you'll be totally fine. view full answer...
We have the replacements for the knob of your Thule Apex XT, part # TH9024XT, here.
For the knob itself, you will need the Replacement Locking Knob for Thule Bike Racks, part # TH79JV. I've linked to a video review of this below.
Since you didn't have this to begin with, you will also need the One-Key System Lock Cylinders, part # TH450200. I've linked to a video review of this, too.
If you still need additional components, let me know. These are the only available. view full answer...
Hey Charlie, typically this problem is related to the adjustment of the brake assemblies being different. Most likely one assembly has a tighter adjustment and is locking up before the other. I'd jack the trailer up so the wheels are off the ground and turn the wheels by hand. You should feel a light drag of the brakes on both wheels. If one has more resistance than the other that would be why.
To see how to manually adjust trailer brake assemblies check out the video I attached, fast-forward... view full answer...
Hey Steve,
I actually own the FloTool RhinoRamps Vehicle Ramp Set # FT11909MI myself to lift my riding mower and work on it and have faced the same issues you're describing here. The outer edge where the handle will start to bulge but it is still safe to use because the weight is held up by the inner construction of the ramps and not the sides. They leave a little flex so that when stacked together you can get your hand in there to pull them back apart.
As for it slipping, I completely... view full answer...
Go To Results